Research / Farm & Agriculture

John Deere – John Deere HarvestLab™ 3000 HarvestLab™ and Constituent Sensing

  • Checkmakr IconSaved

    This Product was Saved

Details

  • CategoryFarm & Agriculture
  • Year2020
  • BrandJohn Deere
  • ModelHarvestLab™ and Constituent Sensing

Key Features

  • Make: John Deere
  • Category: Farm & Agriculture
  • Year: 2020
  • Description:
    • On-the-go measuring of moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar
    • Automatically adjust inoculant dosage based on current dry matter level
    • Automatically adjust length-of-cut, on the go
    • The HarvestLab 3000 equipped with a turn table ensure a more frequent and more accurate evaluation of the ensiled material before rations are mixed.
    • Utilize your HarvestLab 3000 all year long with the dual use capabilities of the Sensor for forage harvest and bunk management with the stationary turn table.

Features

One sensor, two applications

The HarvestLab™ 3000 sensor can be used for two different applications:

  • HarvestLab 3000 and John Deere Constituent Sensing on a John Deere self-propelled forage harvester

The HarvestLab 3000 sensor enables an accurate measurement and documentation of dry matter, starch, protein, neutral detergent fiber, and acid detergent fiber in different crop types. For better fertilization planning in the next season, operators can use the HarvestLab 3000 sensor to determine and document the nutrient values taken off the field during harvest. It also helps achieve higher quality forage by enabling automatic length-of-cut adjustments on the go to ensure an optimal bunker compaction and conservation. In addition, the smart use of additives ultimately leads to higher milk yields and more efficient use of feed.

    • Measure yield while harvesting
    • Accurately determine moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar on-the-go
    • Better determine the value of forage when purchasing for biogas operations
    • Dose inoculants based on current dry-matter level
    • Automatically adjust length of cut on the go
  • Stationary application by adding a stationary kit to the HarvestLab 3000 and connecting it to a computer

HarvestLab 3000 equipped with the HarvestLab 3000 stationary kit

The HarvestLab 3000 sensor and stationary kit can provide time and cost savings with use in the barn, field office, or anywhere feed analysis is needed. For example, the components of a total mix ratio (TMR) can be measured every day to ensure the correct mix ration and achieve the maximum milk yield.

    • Monitor silage quality all year round
    • Support daily feed ration calculation
    • Determine moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar within 2 minutes

Measured data can also be downloaded from the HarvestLab 3000 sensor and saved to a computer for record-keeping purposes or to share with a nutritionist.

Real-time ingredient measurements on-the-go

HarvestLab™ 3000 mounted on spout of a John Deere 8000 Series Self-Propelled Forage Harvester

Developed and patented with Carl-Zeiss, the HarvestLab™ 3000 sensor simultaneously measures the dry matter and various constituents of harvested crops. The HarvestLab 3000 uses the same near-infrared-reflectance (NIR) technology entrusted and used by most nutrition labs, but produces results instantly and with over 4000 readings per second. This provides producers with not simply one random sample value but statistically solid data on the go.

More accurate yield and ingredient documentation

HarvestLab™ 3000 sensor provides on-the-go yield, moisture and constituents data when used in conjunction with the Harvest Monitor™ system. This instantaneous information can then be recorded and documented by using the Harvest Doc™ mapping system and a StarFire™ 6000 Receiver.

Each operation is unique, but in general, silage harvested in a matter of days is expected to feed herds the entire year or be sold throughout the year.

Considering harvest conditions are never perfect and feed quality never improves after harvest or during storage, effective management and the ability to react quickly and efficiently becomes paramount.

The HarvestLab 3000 sensor allows producers to make informed management decisions at harvest and during storage in order to maximize silage and feed quality from the day it is harvested to the day it is fed or sold.

Much value stems from obtaining instantaneous yield, moisture, and constituent data. Producers can do the following:

  • Quickly identify if the crop has reached the optimal moisture to harvest
  • Prevent downtime while waiting for the moisture measurements via drying ovens
  • Automatically adjust the length-of-cut and inoculant levels to the optimal level
  • Optimize the bunk density and fermentation for heightened silage and feed quality
  • Segment the storage facilities based on the moisture or constituent content
  • Compare hybrid/variety productivity
  • Acquire dry volumes
  • Enhance invoicing and documentation
Constituent types
Crop type Moisture Crude protein (XP) Sugar Starch Acid detergent fiber (ADF) Neutral detergent fiber (NDF) Ash
Forage bundle Corn Fresh X X X X X X X
Ensiled X X X X X X X
Haylage Fresh X X X / X X X
Ensiled X X X / X X X
Whole crop silage Fresh X X X X X X X
Ensiled X X X X X X X

For further information regarding the constituents, see John Deere Constituent Sensing in the Sales Manual.

Automated site specific documentation

Data recorded with the HarvestLab™ 3000 sensor on the forage harvester can be sent wirelessly to the John Deere Operations Center. Data is available to view in Field Analyzer after a field has been completed and new work has started, or approximately one half hour after field work has been stopped. Producers can analyze data from completed fields or view where field work is in process, making it easier for them to make operational decisions. Data is available for analysis from any internet-connected device to make important production decisions and gives operations the ability to invoice work recently completed.

Improved web user interface for stationary application

Improved web user interface in stationary application

HarvestLab™ 3000 equipped with the HarvestLab 3000 stationary kit

Easily connect the HarvestLab 3000 sensor with the HarvestLab 3000 stationary kit. The sensor can be removed from a forage harvester or manure tanker in a matter of minutes. The stationary kit offers a practical and easy-to-use solution to measure forage quality away from the John Deere self-propelled forage harvester.

  • Monitor silage quality all year round
  • Better determine the value of forage when purchasing for biogas operations
  • Support daily feed ration calculation
  • Determine dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar within 2 minutes
  • Supply power with 12-V cigarette lighter adapter for mobile use

Operate the stationary application using the intuitive web-user interface, including improved measurements procedure with detailed step-by-step explanations. Store measurements or export them in the CSV format.

AutoLoc™ system

John Deere 8000 Series Self-Propelled Forage Harvest (SPFH) with HarvestLab™ 3000 and AutoLoc

  • HarvestLab 3000
  • Manual control (operator)
  • AutoLoc — automatic length-of-cut control
  • Infinitely variable length of cut (IVLOC™) — length-of-cut changes on-the-go
  • Save up to 5 percent fuel while increasing throughput leveraging AutoLoc.

    AutoLoc, a feature exclusive to John Deere, brings added value to the HarvestLab moisture sensor and John Deere self-propelled forage harvester (SPFH). AutoLoc works in conjunction with the HarvestLab 3000 sensor and IVLOC to automatically adjust the length of cut based on crop-moisture levels to improve bunk density. Nutritionists, herdsmen, and SPFH operators will all benefit from this innovation.

    John Deere is leading the industry in providing real-time information that matters most to forage production. Quality forage comes from properly packed silage, which is directly related to the moisture content and length of cut of the crop.

    Length-of-cut changes are made automatically in the field based on moisture readings and predetermined settings determined by operator requirements. No in-field calibration is required to load the length-of-cut (LOC) requirements; the operator simply uses the GreenStar™ display to program the desired LOC settings at different moisture levels.

    When moisture levels of crop in the field change, the hydrostatic IVLOC feedroll drive automatically responds to either an increase or decrease the feedroll speed, which in turn changes the LOC. If moisture levels of the crop are outside of the desired range, IVLOC adjusts and limits the LOC, based on the maximum and minimum LOC settings, as determined by the operator.

    AutoLoc screen

    Generation 4 Display compatibility

    This document lists all the compatible equipment approved with the software update 20-3 release and is subject to change with newer software updates. To ensure complete and proper compatibility, the most current version of implement control unit software, Generation 4 Display software, or compatible farm management information software (FMIS) should be used. Non-current software versions will require an update before support can be provided. Unapproved software version configurations will not be supported.The software update 20-3 release is only compatible with 4600 CommandCenter™ v2 processors. Software update 17-2 is the last release that was compatible with 4600 v1 processors. Server serial numbers are as follows:

    • v1 = RWG prefix
    • v2 = PCG prefix
    Machine compatibility

    John Deere Large Ag Tractors

    John Deere Large Ag Tractors(list of all automatically detected machines) Model year CommandCenter Universal Display
    4600 v2 4200 4640 4240
    9R/9RT/9RX Series 2018 and newer X --- X X
    9R/9RT/9RX Series 2015-2017 * --- X X
    9R/9RT Series 2012-2014 --- --- X X
    9030/9030T Series 2008 and newer --- --- X X
    9020/9020T Series 2002-2007 --- --- X ---
    9000 Series 1997-2001 --- --- X ---
    9000T Series 2000-2001 --- --- X ---
    8R/8RT Series 2018 and newer X --- X X
    8R/8RT Series Mid-2014 - 2017 * --- X X
    8R/8RT Series 2010-2013 --- --- X X
    8030/8030T Series 2006 and newer --- --- X X
    8020/8020T Series 2002-2005 --- --- X ---
    8010/8010T Series 2000-2002 --- --- X ---
    8000 Series 1994 --- --- X ---
    8000T Series 1997-1999 --- --- X ---
    7R Series 2018 and newer X X X X
    7R Series 2014-2017 * --- X X
    7R Series 2011-2013 --- --- X X
    7J Series 2018 and newer --- --- X X
    7030 Series 2007 and newer --- --- X X
    7030 Series (Large Frame) 2007 and newer --- --- X X
    7030 Series (Small Frame) 2006 and newer --- --- X X
    7020 Series 2003-2007 --- --- X X
    6030 Series (Small Frame) 2006 and newer --- --- X X
    6R Series 2018 and newer X X X X
    6R Series (Final Tier 4) 2015-2017 * --- X X
    6R Series (Interim Tier 4) 2013-2015 --- --- X X
    6M Series 2013 and newer --- --- X X
    6J Series 2018 and newer --- --- X X
    5R Series 2019 and newer --- --- X X

    *NOTE: For latest Precision Ag functionality, update machines equipped from the factory with v1 processor to v2.

    John Deere Nutrient Applicators

    John Deere Nutrient Applicators Model year CommandCenter Universal Display
    4600 v2 4200 4640 4240
    F4365 High-Capacity Nutrient Applicator 2017 and newer X --- --- ---

    John Deere Self-Propelled Sprayers

    John Deere self-propelled sprayers Model year CommandCenter Universal Display
    4600 v2 4200 4640 4240
    4 Series Sprayers 2018 and newer X --- --- ---
    4 Series Sprayers 2013 - 2017 --- --- X** ---
    4940 2012 - 2014 --- --- X** ---
    4630 2008 and newer --- --- X** ---
    4730 2008 and newer --- --- X** ---
    4830 2008 - 2014 --- --- X** ---
    4930 2008 - 2013 (SN 4000+) --- --- X** ---
    Hagie™ sprayers 2014 and newer Compatible with GreenStar™ 3 2630 Displays and 4640 Universal Displays*

    *NOTE: When using the 4640 Universal Display on a Hagie Sprayer, additional mounting and harnessing may be required.

    • 4640 Ram™ Mount - SJ34503
    • 4640 power/video harness - BPF11527 (1-3 video plus machine power), PF90687 (machine power only)

    NOTE: Current John Deere/Hagie field kits only offer GreenStar 3 2630 Display parts.NOTE: Multi-rank section control are not supported on Hagie at this time.NOTE: VIN detection on Hagie Sprayers is only supported on model year 2019 and newer machines.**NOTE: The 4640 Universal Display will replace the GreenStar 3 2630 Display on the armrest. Dual display with the GreenStar 3 2630 Display is not supported with sprayers. Adding the 4640 Universal Display will disable the assignable buttons located on the sprayer armrest.

    John Deere Self-Propelled Forage Harvesters (SPFH)

    John Deere Self-PropelledForage Harvesters Model year CommandCenter Universal Display
    4600 v2 4200 4640 4240
    9000 Series SPFH 2019 and newer --- --- X ---
    8000 Series SPFH 2015 and newer --- --- X ---

    NOTE: When adding the 4640 Universal Display to a John Deere self-propelled forage harvester, it will only be compatible as a precision ag display and is installed on the side rail.

    John Deere Combines

    John Deere combines Model year CommandCenter Universal Display
    4600 v2 4200 4640 4240
    S700 Series 2018 and newer X --- --- ---
    S430 and S440 2017 and newer X --- --- ---
    S600 Series 2012 - 2017 --- --- X* X*
    S540 and S550 Series 2012 and newer --- --- X* X*
    T-Series 2012 and current --- --- X* X*
    70 Series 2008 - 2013 --- --- X* X*
    60 Series 2004 - 2007 --- --- X* ---
    50 Series 2000 - 2003 --- --- X* ---

    NOTE: Competitive equipment may be compatible with 4640 Universal Display and 4240 Universal Display. For additional compatibility information, contact a John Deere dealer.*NOTE: When adding the 4640 Universal Display to a John Deere combine, it will only be compatible as a cornerpost precision ag display.
    Note: Rowsense sensor voltage readings and sensor offsets are displayed on Original Greenstar™ Monitor emulator on 50, 60 and 70 series combines.

    Equipment compatibility

    John Deere plantersSeedStar™ 4HP planters are only compatible with 4600 CommandCenter displays with a version 2 (v2) processor and 4640 Universal Displays. Displays should be running Generation 4 OS software version 10.10.404-390 or newer and the most current version of tractor applications to be compatible with SeedStar 4HP planter applications. Additionally, dual-display mode is available for use with SeedStar 4HP planter applications, along with Generation 4 Extended Monitor. SeedStar 4HP planters are compatible with no more than two GreenStar Rate Controllers.The SeedStar 2 configuration below is available only on factory-installed model year 2011 and newer planters and may be field-installed on model year 2009 and 2010 planters. Green PM/PA controllers (factory-installed on model year 2009 and 2010 planters) are not supported with a Generation 4 display.A Service ADVISOR™ tool (available at a John Deere dealer) is needed to update SeedStar 2, SeedStar XP, and SeedStar 3 HP software. Documentation is not supported when using a rate controller to control row clutches on a John Deere planter.

    John Deere planters Control unit name Software version (or newer) CommandCenter Universal Display
    4600 v2 4200 4640 4240*
    SeedStar 2 Black PM1 22.0 X X X X
    Black PA1, (if available PA 2) 22.0 X X X X
    Green PM1 10.11 --- --- --- ---
    Green PA1 (if available PA 2) 10.11 --- --- --- ---
    SeedStar XP Black PM1 22.0 X X X X
    Black PA1, (if available PA 2) 22.0 X X X X
    PM2 7.0 X X X X
    SeedStar 3 HP Planter Main A (PCMA) 6.0 X X X X
    Planter Main B (PCMB or MMC) 8.0 X X X X
    Row-unit Controller (RUC) 2.0 X X X X
    EPG 3.0 X X X X
    SeedStar 4HP Planter Apps 10.4.332-12 X --- X ---
    Planter Main A (PMCA) 6.0 X --- X ---
    Planter Main B (PMCB or MMC) 10.0 X --- X ---
    Row-unit Controller (RUC) 4.0 X --- X ---
    Electrical Power Generation (EPG) 5.0 X --- X ---
    Electrical Power Module, 2 (PC2) 4.0 X --- X ---
    ExactRate™ liquid fertilizer system Master Nozzle Control Unit (MNC) 2.0 X --- X ---
    Spray Rate Control Unit (SRC) 2.0 X --- X ---
    Liquid Blockage Controller (LBC) 2.0 X --- X ---
    Nozzle Control Unit (NZC) 6.04 X --- X ---
    ExactRate app 10.1.269-64 X --- X ---

    *NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 Radar speed kit.

    John Deere Air SeedersThe C650 and C850 Air Carts and N500C Seeder require a 4600/4200 CommandCenter Display or a 4640/4240 Universal Display. GreenStar 3 2630 monitors are not supported. Additionally, tow-behind C850 Air Carts are compatible with AutoTrac Implement Guidance (passive) with software update 18-2 and newer.

    John Deere Air Seeder Model year/control unit name Software version (or newer) CommandCenter Universal Display
    4600 v2 4200 4640 4240*
    C650/850 Air Cart Cart Master Controller (CMC) 3.0 X X X X
    Mini Tank Controller (TCX) 2.0 X X X X
    Front, Middle, Rear Tank Controller (TCU) 2.0 X X X X
    1870 Seeding Tool - TruSet™ system 2017 and newer (IDC) 5.0 X X X X
    1870 Seeding Tool - RelativeFlow™ blockage sensors 2017 and newer (BMU) 6.0 X X X X
    1910 Air Cart - ground drive 2009 and newer 3.0 X X X X
    1910 Air Cart - hydraulic drive 2013 and newer 11.0 X X X X
    Seeding tools with air-run blockage - primary blockage 2009 and newer (BMU) 12.0 X X X X
    Seeding tools with air-run blockage - air-run blockage 2009 and newer (BMU) 12.0 X X X X
    Member Module 5.0 X X X X
    1990 Central Commodity System (CCS™) 2009 and newer (BMU) 12.0 X X X X
    N500C Series Seeder apps 10.2.19-13 X --- X ---
    SMCA or SMC 4.0 X --- X ---
    SMCB or BMU 3.0 X --- X ---
    EPG 3.0 X --- X ---

    *NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 Radar speed kit.

    John Deere Tillage

    John Deere Tillage Control unit name Software version (or newer) CommandCenter Universal Display
    4600 v2 4200 4640 4240
    AccuDepth™ cultivator Implement Depth Control (IDC) 11 X X X X
    2730 with TruSet Tillage Controller 1 (TC1) 2.66K9 X X X X
    2230 with TruSet Tillage Controller 1 (TC1) 2.75K6 X X X X
    2330 with TruSet Tillage Controller 1 (TC1) 2.35K6 X X X X
    2620/2630 with TruSet Tillage Controller 1 (TC1) 2.95K6 X X X X
    2720 with TruSet Tillage Controller 1 (TC1) 2.24K6 X X X X
    2660VT with TruSet Tillage Controller 1 (TC1) 3.03K12 X X X X
    2430 with TruSet Tillage Controller 1 (TC1) 2.14K4 X X X X
    2510H with TruSet Tillage Controller 1 (TC1) 2.85K5 X X X X

    *NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 Radar speed kit.

    John Deere Round Balers

    John Deere Round Balers Control unit name Software version (or newer) CommandCenter Universal Display
    4600 v2 4200 4640 4240
    0 Series Baler Automation 10.07 X X X X
    9 Series Premium Baler Automation 7.16 X X X X
    V451R/V461R Baler Automation 11.5 X X X X

    John Deere Cotton Harvesters

    John DeereCotton Harvesters Model year CommandCenter Universal Display
    4600 v2 4200 4640 4240
    CP690 2015 and newer --- --- X ---
    CS690 2015 and newer --- --- X ---

    NOTE: Update cab controller software to the latest version on model year 2017 and newer cotton harvesters to use Harvest Identification, Cotton Pro.
    NOTE: When adding the 4640 Universal Display to a John Deere Cotton Harvester, it will only be compatible as a cornerpost precision ag display.

    John Deere Self-Propelled Windrowers

    John Deere Self-PropelledWindrowers Model year CommandCenter Universal Display
    4600 v2 4200 4640 4240
    W235 2014 and newer --- --- X X
    W260 2015 and newer --- --- X X

    *NOTE: When adding the 4640 Universal Display to a John Deere self-propelled windrower, it will only be compatible as a cornerpost precision ag display.

    John Deere Large Square Balers

    John Deere Large Square BalersIncluding Harvest Tec applicator and PhiBer accumulator Control unit name Software version (or newer) CommandCenter Universal Display
    4600 v2 4200 4640 4240
    0 Series Gen 4 VT 3.04 X X X X
    1 Series Gen 4 VT 5.07 X X X X
    Precision Ag Technology software compatibility
    John Deere control units Control unit name Software version (or newer) CommandCenter Universal Display
    4600 v2 4200 4640 4240
    *StarFire 6000 Receiver --- 4.40P X X X X
    StarFire 6000 Integrated Receiver --- 4.40P X X X X
    StarFire 3000 Receiver --- 2.80S X X X X
    *Modular Telematics Gateways (MTG) - 3G --- 21.03 X X X X
    *MTG - 4G --- 27.01.541 X X X X
    GreenStar Rate Controller --- 3.70K X X X X
    GreenStar Rate Controller Dry --- 2.11A X X X X
    *John Deere Rate Controller 2000 --- 1.13A X X X X
    *AutoTrac Universal 200 --- 2.30A --- --- X X
    *AutoTrac Universal 300 --- 3.23R --- --- X X
    AutoTrac Controller 300 --- 3.23R --- --- X X
    AutoTrac Controller 250 --- 11933B --- --- X X
    *AutoTrac Controller - Deere --- 1.11B --- --- X X
    AutoTrac Controller - Raven --- 10.13.909-158 --- --- X X
    AutoTrac Controller - Reichhardt® --- SW 1.3 --- --- X X
    AutoTrac RowSense RG3 AKK15783H X --- X ---
    AutoTrac Vision VGC 4.01V X --- X ---
    AutoPath --- 20-3 X --- X ---
    AutoTrac Turn Automation --- 19-3 X --- X ---
    AutoTrac Implement Guidance --- 19-3 X --- X ---
    Machine Sync --- 20-3 X --- X ---
    Active Implement Guidance (VT) Application Controller 1100 2.71Z X X* X X*
    Application Controller 1100 (S.N. PCXL01C201000-) 3.14A X X* X X*
    iGrade™ Application 1100 2.71Z X X X X
    Application Controller 1100 (S.N. PCXL01C201000-) 3.14A X X X X
    Distance Trip Application 1100 2.71Z X* X X X
    Application Controller 1100 (S.N. PCXL01C201000-) 3.14A X* X X X
    Yield Documentation, Specialty Crop Application Controller 1120 1.51Y X X X X
    Application Controller 1120 (S.N. PCXL02C201000-) 3.14A X X X X
    Mobile Weather Application Controller 1120 1.51Y X X* X X*
    Application Controller 1120 (S.N. PCXL02C201000-) 3.14A X X* X X*
    Harvest Identification, Cotton Application Controller 1120 1.51Y --- --- X ---
    Application Controller 1120 (S.N. PCXL02C201000-) 3.14A --- --- X ---
    Gen 4 Extended Monitor X --- X ---
    Wireless Data Server Wireless Data Server 1.591.2 (Planting)7.564.1(Application)2.573.1(Harvesting) X --- X ---
    Mobile Data Transfer MyTransfer™ app 3.8.6 (iOS®)3.8.5 (Android™) X X X X
    Connect Mobile app Connect Mobile app 8.4.0 or newer X --- X ---
    Connect Mobile server Connect Mobile server 2.3.113-1 X --- X ---
    Manure Constituent Sensing Manure Controller 19.06 X --- X ---

    *NOTE: See additional information below.

    StarFire ReceiversStarFire Receivers can be updated in the following ways:

    • Receiver USB port (available only for StarFire 6000 Receivers)
    • Generation 4 display USB port
    • Remote software updates application (in ISOBUS VT app)

    Additionally, StarFire iTC Receivers are no longer supported with software update 2017-1 and newer software. John Deere Operations CenterTo use RDA on a Generation 4 CommandCenter Display with a GreenStar 3 2630 Display connected in the same machine, GreenStar 3 2630 software version 3.22.1095 (SU2014-1) or higher is required (for 4600 CommandCenter Display and 4640 Universal Display only).GreenStar Rate Controller DryGreenStar Rate Controller Dry (GDC) 2.11A was the last software version available through Software Manager. GDC 2.20A has been available since spring 2015 and contains diagnostic language updates. This software can only be obtained through Service ADVISOR.John Deere Rate Controller 2000The John Deere Rate Controller 2000 will not control the planter clutches or half-, third-, or quarter-width disconnects on a John Deere planter.AutoTrac™ Vision
    AutoTrac Vision Guidance is only compatible with Generation 4 18-1 software 10.10.404-345 or newer. AutoTrac Universal 200, AutoTrac Universal 300, and AutoTrac ControllerAutoTrac Universal 200, AutoTrac Universal 300, and AutoTrac Controllers are for use with the 4640 Universal Display and 4240 Universal Display. Please see a John Deere dealer for exact model compatibility.ISOBUS implementsGeneration 4 Displays support two Agricultural Industry Electronics Foundation (AEF) certified ISOBUS control units The use of two ISOBUS control units is limited to the configuration of one front and one rear implement. The use of multiple ISOBUS control units as rear implements is not supported. Generation 4 Displays support AEF-certified ISOBUS implements with Task Controller Section Control (TC-SC) functionality and AEF certification for TC-SC include sprayers, fertilizer spreaders, planters, seeders, manure applicators, etc. For third-party FMIS compatibility, reference the John Deere Operations Center.A software update performed by an authorized ISOBUS implement dealer may be required to obtain compatible software. ISOBUS implements must be certified through the Agricultural Industry Electronics Foundation (AEF) to be recognized by the Generation 4 CommandCenter display. Visit www.aef-online.org for more information; visit www.aef-isobus-database.org for an active list of compatible implements.ISOBUS implements with VT4 are now supported by Generation 4 Displays. Generation 4 Displays still support older VT versions (example: VT2 and VT3). If an implement is not loading after updating to Generation 4 software update 2017-2 (or newer on 4600 CommandCenter v2 processors), it is recommended that the implement manufacturer be contacted to get a software version that is either VT3 or VT4.Extended monitorWhen using an extended monitor with equipment visualized in ISOBUS VT Viewer and applying VT run page modules to two run pages shown at the same time, the extended monitor’s VT modules will not update. To mitigate this, only view VT modules on one run page at a time.Implements without controllersImplements without controllers can be documented as a stand-alone operation or with a rate controller from John Deere. Additionally, multiple implements without controllers cannot be documented together.
    AutoPath
    AutoPath is compatible with 4600CommandCenter (v2 server) and 4640 Universal displays running 20-3 or later software.
    AutoPath required specific source operation data (including an implement receiver) - gathered during the 1st pass of the year. For more information on AutoPath functionality and requirements, please refer to the Value Selling Navigator. AutoTrac Implement Guidance (passive)

    • AutoTrac Implement Guidance is compatible with SeedStar 4HP, SeedStar 3HP, SeedStar 2, and SeedStar XP.
    • AutoTrac Implement Guidance is compatible 1990CCS Seeders as well as 1910, C650, and 850 Tow-Behind Air Carts.
    • AutoTrac Implement Guidance is NOT compatible on 4240 Universal Displays for shared signal applications.
    • AutoTrac Implement Guidance is NOT compatible with N500C seeding tools and tow between Air Carts.
    • For more information on AutoTrac Implement Guidance – please refer to the Value Selling Navigator.

    AutoTrac Turn AutomationTo use the AutoTrac Turn Automation application, specific compatibility is required. AutoTrac Turn Automation is compatible with the following machines:

    • 8030 Series Tractors
    • 9030 Series Tractors (if equipped with PowerShift™ transmission)
    • Model year 2012 and newer 6R Tractors (if equipped with Infinitely Variable Transmission [IVT™] and ITEC™ functionality)
    • Model year 2011 and newer 7R Tractors (if equipped with CommandQuad™ transmission, e23™ PowerShift transmission, or IVT)
    • Model year 2010 and newer 8R/RT Tractors
    • Model year 2012 and newer 9R/RT/RX Tractors

    NOTE: Integrated tractor IMS must be turned off on 30-Series Tractors to use AutoTrac Turn Automation on the Generation 4. Integrated Tractor iTEC must be turned off on the following tractors to use AutoTrac Turn Automation on the Generation 4:

    • Model year 2012-2014 6R
    • Model year 2011-2013 7R
    • Model year 2010-2013 8R
    • Model year 2012-2014 9R

    NOTE: If instead an operator chooses to use the machine’s integrated IMS/iTEC functionality, then AutoTrac Turn Automation and iTEC must be turned off in the Generation 4 Universal Display.AutoTrac Turn Automation is compatible with SeedStar 4HP, SeedStar 3HP, SeedStar 2, and SeedStar XP planters, 1990CCS Seeders, and 1910, C650, and C850 Tow-Behind Air Carts.AutoTrac Turn Automation is compatible with N500C Series Air Tools with selective control valves (SCVs) operating in manual mode. See the "Additional Information" section of Case and Contact Management System (CCMS) solution 115995 for more information.
    AutoTrac Turn Automation is NOT compatible with the following implements and implement configurations:

    • Front-mounted implements
    • Tow-between air carts
    • Multiple implements pulled in series where the work piece is not connected directly to the tractor

    For more information on AutoTrac Turn Automation, please refer to the Value Selling Navigator.

    Machines Sync
    Supported Leader Platforms

    • Combine:
      • X Series Combines, S Series Combines, W Series Combines, T Series Combines, 70/60/50 Series Combines
    • Self-Propelled Forage Harvesters
      • 9000 Series and 8000 Series
    • John Deere Tractors
      • John Deere Tractors with Gen4 4600 Command Center ™ displays and John Deere tractors compatible with the Gen4 4640 Universal Display

    Supported Follower Platforms

    • John Deere Tractors (Wheeled Models)
      • 6R Infinitely Variable Transmission (IVT™) (iTEC™ functionality required) tractors
      • 7R CommandQuad™ Eco transmission, e23™ transmission, and IVT tractors
      • 8030 PowerShift™ transmission and IVT tractors
      • 8R PowerShift, IVT, and e23 transmission tractors
      • 9030 PowerShift transmission tractors
      • 9R PowerShift transmission with Efficiency Manager™ feature tractors
    • John Deere Tractors (Tracked Models)
      • 8RT/8RX PowerShift,IVT and E23 transmission tractors
      • 9RT/9RX PowerShift transmission with Efficiency Manager feature tractors
    • Note: John Deere 8030T and 9030T Models are not compatible with Machine Sync

    Reprogramming Application Controllers 1100 and 1120CommandCenter 4600 v1 does not support reprogramming on the UCC2 version of Application Controller 1100 and 1120. Service ADVISOR or compatible displays may be used.Distance Trip documentation/Yield Documentation, Specialty CropA UCC2 Application Controller 1100 with 19-2 software or newer, running on a 4600 CommandCenter v2 server enables documentation of field operations. If a UCC2 replaces a UCC1 Application Controller 1100 on a CommandCenter v1 server, documentation is not available.Camera compatibilityVoyager® cameras are supported on Generation 4 Displays. All other camera types are not supported.Non-John Deere Precision Ag4600 CommandCenter v2 and the 4640 Universal Display are compatible with the following RS-232 configurations with software update 18-2 and newer:

    • Global positioning system (GPS) receivers with serial port connection
      • Will not enable AutoTrac guidance functionality
    • Raven RS-232 control units (440, 450, or 660) on tractors configured as implement-based applications
    • Generation 4 displays are not compatible with the DN345 Drawn Dry Spreader at this time.

    4600 CommandCenter v2 and the 4640 Universal Display are compatible with the following RS-232 configurations with software update 20-3 and newer:

    • Yara N-Sensor
    • Fritzmeier
    • Trimble® GreenSeeker®
    • LH 5000

    Machine Communication Radio (MCR)Generation 4 displays are not compatible with MCR.APEX™ software

    • Generation 4 display work data is not compatible with and cannot be viewed in APEX software.
    • USB files including pre-assigned APEX tasks and iTEC Pro sequences will not import into Generation 4 displays.

    NOTE: Gen 4 data is only compatible with the John Deere Operations Center. All Gen 4 activations are machine specific and cannot be transferred to a different machine. If not using WDT, an 8- to 32-GB USB is required to transfer data to and from the Gen 4 Display. Implement settings are display specific and cannot be imported or exported from the Gen 4 Display.RAM is a trademark of National Products Inc. Hagie is a trademark of Hagie Manufacturing Company, LLC and similar to John Deere branded equipment, John Deere will support Hagie equipment. Reichhardt is a trademark of Reichhardt GmbH Steuerungstechnik. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC. Voyager is a trademark of ASA Electronics, LLC. Trimble and GreenSeeker are trademarks of Trimble, Inc.

    There are no special offers for this product at this time, please check back soon.

    There are no reviews for this product.

    John Deere Reviews

    These reviews have been taken from John Deere
    • 5 star icon 0
    • 4 star icon 0
    • 3 star icon 0
    • 2 star icon 0
    • 1 star icon 0
    John Deere Logo

    Interested in customizing this unit?
    Request unit below.

    Need to purchase online? Browse our online inventory

    Call for details

    Request more information

    Select a location to view the phone number.

    Suggested Similar Products

    John Deere – C500 Mower-Conditioner

    • List price N/A
    • Horse Power

    Key Features

    • 16 ft 4 in. (5 m) cutting width
    • Reduce service time with Quick Change Knives
    • Easier serviceability with modular-design cutterbar
    • Improve windrow formation and reduce ash content with overshot cross auger
    • Urethane, V-10 conditioners or Tri-Lobe conditioners

    John Deere – C450 Mower-Conditioner

    • List price N/A
    • Horse Power

    Key Features

    • Easier serviceability with modular-design cutterbar
    • Updated design and styling
    • Reduce service time with Quick Change Knives
    • Steel roll conditioners
    • Impeller, urethane, V-10 conditioners or Tri-Lobe conditioners

    John Deere – C400 Mower-Conditioner

    • List price N/A
    • Horse Power

    Key Features

    • Reduce service time with Quick Change Knives
    • Updated design and styling
    • Decreased horsepower and fuel requirements due to lighter weight1
    • Easier serviceability with modular-design cutterbar
    • Impeller, urethane or V-10 conditioners