How To Repair Ruts Or Tire Tracks

posted on Saturday, July 4, 2020 in Blog

Being able to repair ruts or tire tracks around your property is a handy skill to have. Because no matter how soft your tractor seat might be, dealing with a bumpy ride while doing your work can be a real pain in the . . . seat. Besides being uncomfortable, it can impact how effectively you can actually do your work.

We’ll start by round bale storage area. Theirs is a very active cow/calf/hay operation, and the weather this spring was pretty wet. Now that things have dried out, tire tracks made by their tractors on the wet ground have hardened making for a mighty bumpy ride.

So we’ll use a John Deere 5100R Utility Tractor (US) and a Frontier RB2308 Rear Blade (US) to which we’ve added a pair of bolt-on endplates. That basically turns this 96-inch (244 cm) rear blade into a 96-inch box blade, which will give our operator, Digger Dan, more control in moving that soil around. We’ve also added front and rear wheel weights, a John Deere 540R Loader (US), and 73-inch (185 cm) Material Bucket.

As you might imagine, this is a pretty simple project. Dan will run the rear blade over the tire tracks, both parallel with them and at an angle, knocking down the ridges, and moving soil around to fill in the rutted areas and create a more even surface. The end plates on the rear blade will carry more soil to fill in deep ruts and keep the rear blade from digging in too deep.

The important thing is to be patient and not start this project too soon. If the ground is too wet, you’ll just be making new tire tracks while you’re trying to smooth out the old ones. So make sure the soil is dry enough that you can move it effectively, eliminating the ruts, and not making new ones in the process.

Frontier has nearly 600 implements that are available only from your John Deere dealer, the place to go for advice and equipment.

So remember, for implements that help turn your tractor into the workhorse it was built to be, think Frontier and your John Deere dealer.

And lastly, always read the Operator’s Manual before operating any piece of equipment and follow all operating and safety instructions.

Helpful Links:

Frontier Rear Blades (US)

Frontier Landscape Equipment (US)

John Deere Tractors (US)

John Deere Loaders (US)

How to maintain a gravel driveway.

How to repair a gravel driveway.

How To Gravel A Country Lane.

How To Remove Snow 3 Different Ways

Find Your Dealer (US)

Check out more videos from John Deere here: https://tipsnotebook.deere.com/repair-ruts-or-tire-tracks/